Enbrighten In-Wall Add-On Paddle Switch, White & Light Almond (59339)

Description

Create a multi-way lighting control setup within your home or business to control your smart lighting with the Enbrighten In-Wall Add-On Paddle Switch. This add-on rocker switch shares control of the same wired load as a connected primary Enbrighten in-wall switch or dimmer to create a multi-way lighting control configuration. If the connected Enbrighten primary switch is a part of a smart home automation network, the Add-On Switch remains capable of controlling the wired load but does not act as a signal repeater. The Add-On Switch cannot function as a standalone switch and must be included into or create a multi-way wiring configuration. The Switch can be included into multi-way wiring configurations up to 6-way control, with up to 4 Add-On Switches being paired with a single Enbrighten switch. If multiple Add-On Switches are a part of a single multi-way configuration, the Add-On Switches must be installed no more than 75ft away from each other, no more than 200ft away from the primary switch, and the entire configuration must not exceed 300ft from one end to the other.
Add-On rocker switch provides additional local On/Off control of a wired load when paired with a primary Enbrighten switch
Supports 2, 3, 4, 5, or 6-way wiring configurations
Compatible with Enbrighten Z-Wave Plus, Zigbee, and Wi-Fi in-wall devices when paired with a similarly compatible primary switch
Each Add-On Switch must be installed within 200ft of the primary switch
For 3, 4, 5, or 6-way configurations, an Add-On switch must be within 75ft of each directly wired Add-On switch
Total multi-way wiring interconnection must fit not exceed 300ft
Uses a standard rocker wallplate, sold separately
Interchangeable rocker switch – white and light almond paddles included
The Enbrighten In-Wall Add-On Paddle Switch is designed with QuickFit and SimpleWire features:
QuickFit:
Provides a housing that's smaller by 20% with no break-off tabs to remove, which is ideal for older-style switch boxes, multi-gang configurations, or any other application with limited space.
SimpleWire:
Auto-detects line/load terminals, making installation easier and quicker by detecting line and load wires and configuring the dimmer accordingly. It also features an offset dual ground terminal to avoid switch box mounting screws.
Installation Details
The switch requires standard screw terminal installation with wiring connections for Neutral, Ground, and Traveler. The switch is not a stand-alone device and must be used in a multi-pole application with a Enbrighten primary switch.
Contents
Enbrighten In-Wall Add-On Paddle Switch, White
Light Almond Paddle
Installation Guide
Notes
Single-gang wallplate sold separately. For indoor use only.
The add-on switch is not wireless enabled and must be used exclusively with an Enbrighten switch.
It is not designed for stand-alone use to control an electrical load. It does not have wireless functionality and does not act as a repeater in your wireless control network.
Technical Details
Manufacturer Part #:
59339
UPC:
030878593397
Size:
1-Gang
Power:
120-277VAC, 60 Hz
Environmental Conditions:
For indoor use only
Operating Temperature Range:
32 to 104° F (0 to 40° C)
Maximum Traveler Wire Distance:
300ft., interconnected between 4 Add-On switches; No more than 75ft between each switch
Maximum Traveler Wire Distance Between Primary and (1) Add-On Switch:
200ft
Dimensions:
4.13 H x 1.75 W x 1.13 inches D (104.9 x 44.5 x 28.7 mm)
Approvals:
UL Certified
Warranty:
5 Year