Enbrighten Z-Wave Plus v2 Smart Receptacle, Tamper Resistant, 700 Series (58449)

Description

Add automation control to your home using Z-Wave technology by replacing a standard outlet with the Enbrighten Z-Wave Plus v2 Smart Receptacle, Tamper Resistant, 700 Series. When paired with a compatible Z-Wave hub, this outlet provides endless home automation possibilities, including voice control with Alexa and Google Home Assistant or wireless control of a plugged in appliance or lamp. This smart outlet includes a pass-through "always on" top outlet and a Z-Wave Plus controlled bottom outlet, which allows just about any low voltage plug-in device to be integrated into your automated Z-Wave network.
One "always on" outlet and one Z-Wave Plus controlled outlet
Z-Wave 700 Series Chipset includes S2 security and SmartStart provide easy inclusion into automation networks and secure operation
Local On/Off button on the outlet allows for manual control of the device
Built-in LED indicates On/Off status and helps locate outlet in the dark
Range up to 150 ft (line of sight) between the closest Z-Wave Plus receiver and wireless controller
Tamper-resistant design prevents insertion of foreign objects
The receptacle uses your existing wiring for easy installation (neutral wire required). As a tamper-resistant receptacle, this model prevents foreign objects from being inserted into the electrical slots, providing built-in protection that is superior to conventional protection plates or outlet caps.
The Z-Wave Plus controlled outlet supports a plug-in incandescent lamp up to 960 Watts, motor loads up to 1/2 HP, or 1800W/15A resistive loads. The entire receptacle (both outlets) can handle a total load up to 1800W/15A.
Z-Wave Plus v2 Certification
Z-Wave Plus v2 is an upgraded Z-Wave certification program to help you identify products that take advantage of the latest Z-Wave hardware platform, also known as 700 Series or Gen7 Z-Wave. Z-Wave Plus v2 compatible devices include extended wireless range up to 2600 ft/800 m, three layers of encryption, faster operation, and longer battery life.
Available Colors:
White or Light Almond
Contents
Z-Wave In-Wall Tamper-Resistant Smart Outlet
Quick Start Guide
Notes
Requires a Z-Wave hub controller.
Neutral wire required.
Wallplate not included. Uses standard single-gang wallplate. For indoor use only.
The switch is designed only for use with permanently installed fixtures.
Technical Details
Manufacturer Part #:
58449
UPC:
030878584494
Power:
120 VAC, 60 Hz
Frequency:
908.42/916 MHz
Total Max Load for Both Outlets:
1800W (15A), Resistive load
Range:
Up to 150 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
Environmental Conditions:
For indoor use only.
Operating Temperature Range:
32 to 104°F (0 to 40°C)
Approvals:
FCC, IC
Warranty:
2-Years Limited