PCS PulseWorx UPB Split Duplex Wall Receptacle, White (RM1-15-W)

Description

Plug any device into the PulseWorx UPB Receptacle Module to immediately enable UPB control. This module features one UPB-controlled outlet on top and one regular pass-through outlet on bottom. It can replace a traditional duplex receptacle using the existing wiring, making it easy to extend UPB control throughout your home or business.
Top outlet responds to UPB commands
Bottom outlet stays powered independently
Supports 120V loads up to 15A
Optionally set "max on time" for auto-off
Adjustable multi-color LED night light
Can be a member of up to 16 scenes
The PulseWorx UPB Receptacle Module enables UPB remote control for a plug-in load up to 120VAC with a maximum rating of 15 Amps. It’s perfect for controlling lamps, fans, motors, pumps, and other non-dimming appliances.
Supports Scenes & Auto-Off
The UPB-controlled outlet can be included in up to 16 scenes and gives you three relay options (On, Off, or Blink) for each scene. These pre-set options are easily adjustable through the PulseWorx manual programming method. You also have the option of setting a "maximum on time" (up to 240 minutes) to automatically turn off a plugged in appliance after the set time. A multi-color LED (blue, magenta or red) near the bottom outlet indicates the module’s status and provides an adjustable night light.
Tamper-Resistant to Protect Children
Designed with safety in mind, the module is constructed from high-impact resistant thermoplastic and is tamper-resistant to protect children, automatically shuttering its receptacles when a plug is removed. This meets the National Electrical Code standards required for residential installations.
NOTE: Wallplate not included.
Technical Details
MPN:
RM1-15-W
Color:
White
Electrical
Power Requirements:
Primary: 120 Volts AC, 50/60Hz
Max. Controlling Load:
15-Amp or 1/2 hp maximum loading
Transmission Channels:
1 Scene on Auto Off Time out
Connections:
Colored Screws
Brass Screw (Lower Right) - Hot/Line
Brass Screw (Upper Right) - Load
Silver Screw (Upper/Middle Left) - Neutral
Green Screw (Lower Left) - Ground
Standby Power:
< 0.8 Watts
Environmental Conditions:
Indoor Use Only
Temperature:
-40° to 140°F (-40° to 60°C)
Humidity:
10 to 90 percent RH (non-condensing)
Certifications:
Pending ETL tested to UL508; UL-508-2010 CSA C22.2 #14-2010
Operation
Status LED Indicator:
Programmable with UPStart - Blue, Red, Magenta or Off. Located in lower ground outlet
During Power Outage:
Retains all settings in Non-volatile EERPOM
Setup Mode:
Press the setup button 5 times. Located in upper ground hole
Mechanical
Mounting:
Single or multi-gang junction box
Dimensions:
3.31(H) x 1.20(W) x 1.90(D) inches
Weight:
3.4 ounces
Warranty:
5 years
US Patent No.:
6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.