X10 Duplex Wall Receptacle, Both Outlets Controlled (XPR-W), White

Description

When you plug an appliance into the X10 Duplex Receptacle Module (Both Outlets Controlled), you can turn it on/off remotely with an X10 controller. This heavy-duty receptacle supports two plug-in appliances up to 20A each. You can also automate an external load or downline receptacle by wiring it to the module’s Blue Switched Leg Wire.
Both outlets respond to on/off X10 commands
Supports two plug-in appliances
Installs in a single-gang box
When an appliance is plugged into the X10 Duplex Receptacle Module, you can still turn it on/off with its local switch. The module senses if any load is plugged into it, so when the switch is local toggled, the modules knows to respond.
Contents
X10 Duplex Receptacle
Mounting Hardware
NOTE: Wallplate not included.
The X10 Duplex Receptacle Module is an X10 Wired-In Receiver
A basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home’s electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.
Technical Details
MPN:
XPR-W
UPC:
099081000306
Color:
White
Number of Controlled Outlets:
2
Minimum Load:
40W
Maximum Current:
20 Amps
Operating Voltage:
110-120 VAC
Dimensions:
2-3/4(H) x 1-3/4(W) x 1-1/2(D) inches (4-1/8 inch height including mounting tabs)
Warranty:
2 Years Limited